Marshe
If you are sourcing glass lenses for coastal street lights, start with three checks.
Choose a suitable borosilicate glass lens, confirm that it fits your LED and luminaire, and ask the supplier about the aluminum holder, silicone gasket and waterproof test scope.
Think of the glass lens as a pair of glasses, the aluminum holder as the frame, and the gasket as the soft seal inside a bottle cap.
They need to work together; replacing the lens alone does not make the whole light waterproof.
SunshineOpto’s 2026 catalogue lists several borosilicate glass lenses for street lighting. Across the catalogue, sizes range from 50 mm to 130 mm, with different beam angles and LED compatibility.
This guide explains how to compare models, specify an aluminum holder and prepare an RFQ. Catalogue figures are stated specifications; confirm the exact configuration, test scope and quotation for your selected model.
Content:
Why Consider Borosilicate Glass Lenses for Coastal Street Lights?
Which SunshineOpto Street Light Glass Lens Models Are Available?
What Do the Aluminum Holder and Silicone Gasket Do?
How to Check Whether a Glass Lens Fits an Existing LED Street Light?
How to Request a Quotation or Sample?
FAQs About Buying Glass Lenses for Coastal Street Lights
Sea air carries salt. Sunlight heats the luminaire during the day, and it cools at night.
Over time, some plastic lenses may yellow, become hazy or show scratches. The light may still be on, but the road can look as if it is behind a thin veil.
Borosilicate glass is less prone to yellowing and is more scratch-resistant. This makes it worth considering for outdoor coastal lighting projects.
A glass lens must also match the luminaire size, LED chip and beam angle.
Think of it like choosing eyeglasses: a good lens will not help if the frame does not fit or the prescription is wrong.
For a coastal project, do not ask only, “Is it glass?”
Ask which model fits your light and what supporting documents are available.
SunshineOpto’s 2026 catalogue states an initial light transmittance of at least 97%, with an anti-reflective coating option. It also lists a glass-material operating temperature range of -50°C to +450°C.
These are catalogue specifications for the glass material. They do not mean the gasket, holder, LED or complete luminaire can operate across the same temperature range.
The catalogue’s street light series uses borosilicate glass and is listed with a metal holder and silicone gasket.
The stated applications include street lights, park lights and tunnel lights.
Use the table below to shortlist models. Before ordering, check the available space inside the luminaire, mounting holes and LED chip size.
|
Model |
Size |
Beam angle |
Catalogue LED power range |
Maximum LED chip size |
|
SUN-SL56 |
Dia. 56 × H 20 mm |
135 × 75° |
10–30 W |
<40 × 26 mm |
|
SUN-SL66 |
Dia. 66 × H 20.5 mm |
120 × 75° |
10–30 W |
<49 × 30 mm |
|
SUN-SL78 |
Dia. 78 × H 30 mm |
120 × 60° |
10–100 W |
<53 × 39 mm |
|
SUN-SL86-52 |
86 × 52 × 30.3 mm |
140 × 70° |
10–100 W |
<35 mm |
|
SUN-SL92 |
Dia. 92 × H 25.8 mm |
120 × 60° |
10–100 W |
<55 × 44.5 mm |
|
SUN-SL105-39 |
Dia. 104.6 × H 39.4 mm |
110 × 60° |
50–100 W |
<50.7 × 37 mm |
|
SUN-SL107-87 |
Dia. 107 × H 33 mm |
75 × 135° |
50–100 W |
<76 × 51 mm |
|
SUN-SL107-87-2 |
Dia. 107 × H 31 mm |
90 × 135° |
50–100 W |
<65 × 55 mm |
|
SUN-SL107-87-3 |
Dia. 107 × H 32.8 mm |
60 × 135° |
50–100 W |
<72 × 38 mm |
|
SUN-SL107-87-18 |
Dia. 107 × H 30 mm |
160 × 110° |
50–100 W |
<66 × 43 mm |
A beam angle is a little like the direction of water from a showerhead. Some beams spread light more widely, while others send more light along the road.
The SUN-SL107-87 series offers several beam angles for projects that need different road-lighting distributions.
Do not choose by wattage alone; pole height, road width and pole spacing also affect the result.
The catalogue also lists custom glass molding and DIALux lighting simulation.
DIALux is lighting-design software that can help show how light may fall on the road before you select or customize LED lens.
It is a little like previewing a room before renovation. Share the road layout and pole positions with the supplier, then review the simulation before confirming a model or custom design.
The aluminum holder secures the lens.
The holder, gasket and contact surface work together to form the joint.
Think of the holder as an eyeglass frame. It must support the lens, but the frame alone cannot seal the edges.
The SunshineOpto catalogue lists metal holders, including stainless steel or aluminum options, as well as high-temperature silicone gaskets.
Pairing an aluminum holder with an aluminum housing can reduce direct contact between different metals. For coastal conditions, we recommend aluminum to help extend service life.
If the design requires stainless steel parts, ask the supplier how the contact points are isolated or protected.
Confirm the final material combination for the complete luminaire, since the catalogue does not confirm every holder configuration for every model.
The catalogue lists IP67 with its matched accessory and gasket offering.
IP67 is a dust- and water-ingress rating, not a salt-corrosion rating, and it does not automatically mean the complete LED street light has passed an IP67 test.
Like a raincoat can be waterproof while its zipper or seams still leak.
Ask whether the test covers the lens assembly, LED coastal modules or complete luminaire, and request the relevant test information.
Also confirm the gasket compression, assembly conditions and maintenance requirements.
This helps you judge whether the catalogue accessory information applies to your luminaire.
If you are replacing a lens in an existing coastal LED street light, do not order based on a photo alone.
Measure the old LED lens diameter and height, and note the mounting holes, holder shape and space inside the luminaire.
Then check the LED chip size. Also confirm that the lens will not interfere with the heat-sink parts or existing wiring and LED driver connections.
Lenses may look similar but still fail to fit just because of a small difference in edge thickness or hole position.
Include clear front and back photos, a measurement photo with a ruler, the luminaire model and the LED chip model in your inquiry.
The supplier can then compare your existing assembly with candidate models such as SUN-SL56, SUN-SL66, SUN-SL78 or SUN-SL107.
If the dimensions do not match, ask about the custom LED glass molding service listed in the catalogue.
Then confirm the required drawings, customization feasibility, cost and lead time in the formal quotation.
These details depend on the design and order, and are not specified as fixed terms in the catalogue.
The beam must also suit the road. Share the pole height, road width, pole spacing and the issue you want to solve, such as a dark road surface or uneven lighting.
The supplier can then discuss a beam angle or the catalogue’s DIALux simulation service.
When requesting a quotation for LED street light glass lens, state the application and preferred model, then include your LED and luminaire details.
Prepare at least the following information:
1.Model or lens size: Give the model, such as SUN-SL66, or provide the diameter, height and mounting-hole details.
2.LED information: Include the LED model, chip size and power so the supplier can check catalogue compatibility.
3.Road and beam requirements: Share the pole height, road width, pole spacing and preferred light direction.
4.Coastal installation conditions: Explain whether the light is exposed to sea air, sea spray or frequent washing, and state your preference for an aluminum holder.
5.Testing and commercial details: Ask what the IP test covers, and request available test documents, sample terms, MOQ, price and lead time. These commercial terms should be quoted for the specific model and quantity; they are not fixed in the catalogue.
You can copy this RFQ template and fill in the details:
We are sourcing LED glass lens for an outdoor street light in a coastal project. The existing luminaire measures [diameter / height / mounting holes]. The LED model and chip size are [details]. The pole height is [value], road width is [value], and pole spacing is [value]. Please recommend a suitable borosilicate glass lens model and beam angle, and confirm whether it is available with an aluminum holder and silicone gasket. Please provide the relevant product drawing, compatible LED range, IP test scope and report details, and quote for samples, MOQ and lead time.
The catalogue also lists DIALux lighting simulation. If you need a simulation, include the road dimensions and pole layout.
Why consider a borosilicate glass lens for a coastal street light?
Sea air, sunlight and temperature changes put outdoor lenses to the test. Borosilicate glass is less prone to yellowing and is more scratch-resistant.
Which street light glass lens model is right for my project?
Share the existing lens dimensions, LED chip size, pole height, road width and pole spacing. Then compare the catalogue models by size, compatible LED power and beam angle.
For example, SUN-SL56 and SUN-SL66 are smaller models, while the SUN-SL107 series offers several beam-angle options. The right model depends on both fit and lighting requirements.You can also send us a photo of the existing lens and a measurement photo with a ruler. Confirm the fit first, then discuss the beam distribution.
What is the SUN-SL107-87 street light lens used for?
The catalogue lists the SUN-SL107-87 at Dia. 107 × H 33 mm, with a 75 × 135° beam angle. It is listed for 50–100 W LEDs and LED chips smaller than 76 × 51 mm.
To check whether it suits your road, confirm the installation space and pole layout. You can include the model in your RFQ and ask us to review the beam angle against your road width, pole height and spacing.
Can an aluminum holder make a street light waterproof?
The aluminum holder alone cannot guarantee waterproofing. It secures the LED lens, while the gasket, contact surface and assembly method all affect the joint.
Let us confirm the holder and gasket configuration for your model. Also confirm whether any IP test covers the lens assembly, module or complete luminaire.
Does the catalogue’s IP67 rating apply to the complete street light?
Do not assume that it does. The catalogue lists IP67 with the matched gasket and accessory offering, but the complete luminaire’s rating depends on the tested assembly and its configuration.
Ask for the test scope, installation conditions and report details for the exact configuration you plan to use.
Can a glass lens be customized for an existing LED street light?
The catalogue lists custom glass molding as an available service. Send the existing lens dimensions, mounting holes, luminaire photos, LED chip size and beam requirements so wer can assess the design.
How do I request a quotation or sample for a street light glass lens?
Email sales@sunshineopto.com with the target model or dimensions, LED model, chip size, luminaire photos, pole height, road width and pole spacing.
Ask for sample terms, price, MOQ, lead time and the relevant test documents. Commercial terms should be confirmed for your specific model and quantity.
Can I request a DIALux simulation before buying?
The catalogue lists DIALux lighting simulation as an available service. Provide the pole height, road width, pole spacing, luminaire dimensions and desired light distribution.
Confirm the required input files and simulation scope with the supplier before deciding on a model or custom design.
Need a quotation or model recommendation?
Email your target model or dimensions, LED lens model, luminaire photos, pole height, road width and pole spacing.
Marshe
If you are sourcing glass lenses for coastal street lights, start with three checks.
Choose a suitable borosilicate glass lens, confirm that it fits your LED and luminaire, and ask the supplier about the aluminum holder, silicone gasket and waterproof test scope.
Think of the glass lens as a pair of glasses, the aluminum holder as the frame, and the gasket as the soft seal inside a bottle cap.
They need to work together; replacing the lens alone does not make the whole light waterproof.
SunshineOpto’s 2026 catalogue lists several borosilicate glass lenses for street lighting. Across the catalogue, sizes range from 50 mm to 130 mm, with different beam angles and LED compatibility.
This guide explains how to compare models, specify an aluminum holder and prepare an RFQ. Catalogue figures are stated specifications; confirm the exact configuration, test scope and quotation for your selected model.
Content:
Why Consider Borosilicate Glass Lenses for Coastal Street Lights?
Which SunshineOpto Street Light Glass Lens Models Are Available?
What Do the Aluminum Holder and Silicone Gasket Do?
How to Check Whether a Glass Lens Fits an Existing LED Street Light?
How to Request a Quotation or Sample?
FAQs About Buying Glass Lenses for Coastal Street Lights
Sea air carries salt. Sunlight heats the luminaire during the day, and it cools at night.
Over time, some plastic lenses may yellow, become hazy or show scratches. The light may still be on, but the road can look as if it is behind a thin veil.
Borosilicate glass is less prone to yellowing and is more scratch-resistant. This makes it worth considering for outdoor coastal lighting projects.
A glass lens must also match the luminaire size, LED chip and beam angle.
Think of it like choosing eyeglasses: a good lens will not help if the frame does not fit or the prescription is wrong.
For a coastal project, do not ask only, “Is it glass?”
Ask which model fits your light and what supporting documents are available.
SunshineOpto’s 2026 catalogue states an initial light transmittance of at least 97%, with an anti-reflective coating option. It also lists a glass-material operating temperature range of -50°C to +450°C.
These are catalogue specifications for the glass material. They do not mean the gasket, holder, LED or complete luminaire can operate across the same temperature range.
The catalogue’s street light series uses borosilicate glass and is listed with a metal holder and silicone gasket.
The stated applications include street lights, park lights and tunnel lights.
Use the table below to shortlist models. Before ordering, check the available space inside the luminaire, mounting holes and LED chip size.
|
Model |
Size |
Beam angle |
Catalogue LED power range |
Maximum LED chip size |
|
SUN-SL56 |
Dia. 56 × H 20 mm |
135 × 75° |
10–30 W |
<40 × 26 mm |
|
SUN-SL66 |
Dia. 66 × H 20.5 mm |
120 × 75° |
10–30 W |
<49 × 30 mm |
|
SUN-SL78 |
Dia. 78 × H 30 mm |
120 × 60° |
10–100 W |
<53 × 39 mm |
|
SUN-SL86-52 |
86 × 52 × 30.3 mm |
140 × 70° |
10–100 W |
<35 mm |
|
SUN-SL92 |
Dia. 92 × H 25.8 mm |
120 × 60° |
10–100 W |
<55 × 44.5 mm |
|
SUN-SL105-39 |
Dia. 104.6 × H 39.4 mm |
110 × 60° |
50–100 W |
<50.7 × 37 mm |
|
SUN-SL107-87 |
Dia. 107 × H 33 mm |
75 × 135° |
50–100 W |
<76 × 51 mm |
|
SUN-SL107-87-2 |
Dia. 107 × H 31 mm |
90 × 135° |
50–100 W |
<65 × 55 mm |
|
SUN-SL107-87-3 |
Dia. 107 × H 32.8 mm |
60 × 135° |
50–100 W |
<72 × 38 mm |
|
SUN-SL107-87-18 |
Dia. 107 × H 30 mm |
160 × 110° |
50–100 W |
<66 × 43 mm |
A beam angle is a little like the direction of water from a showerhead. Some beams spread light more widely, while others send more light along the road.
The SUN-SL107-87 series offers several beam angles for projects that need different road-lighting distributions.
Do not choose by wattage alone; pole height, road width and pole spacing also affect the result.
The catalogue also lists custom glass molding and DIALux lighting simulation.
DIALux is lighting-design software that can help show how light may fall on the road before you select or customize LED lens.
It is a little like previewing a room before renovation. Share the road layout and pole positions with the supplier, then review the simulation before confirming a model or custom design.
The aluminum holder secures the lens.
The holder, gasket and contact surface work together to form the joint.
Think of the holder as an eyeglass frame. It must support the lens, but the frame alone cannot seal the edges.
The SunshineOpto catalogue lists metal holders, including stainless steel or aluminum options, as well as high-temperature silicone gaskets.
Pairing an aluminum holder with an aluminum housing can reduce direct contact between different metals. For coastal conditions, we recommend aluminum to help extend service life.
If the design requires stainless steel parts, ask the supplier how the contact points are isolated or protected.
Confirm the final material combination for the complete luminaire, since the catalogue does not confirm every holder configuration for every model.
The catalogue lists IP67 with its matched accessory and gasket offering.
IP67 is a dust- and water-ingress rating, not a salt-corrosion rating, and it does not automatically mean the complete LED street light has passed an IP67 test.
Like a raincoat can be waterproof while its zipper or seams still leak.
Ask whether the test covers the lens assembly, LED coastal modules or complete luminaire, and request the relevant test information.
Also confirm the gasket compression, assembly conditions and maintenance requirements.
This helps you judge whether the catalogue accessory information applies to your luminaire.
If you are replacing a lens in an existing coastal LED street light, do not order based on a photo alone.
Measure the old LED lens diameter and height, and note the mounting holes, holder shape and space inside the luminaire.
Then check the LED chip size. Also confirm that the lens will not interfere with the heat-sink parts or existing wiring and LED driver connections.
Lenses may look similar but still fail to fit just because of a small difference in edge thickness or hole position.
Include clear front and back photos, a measurement photo with a ruler, the luminaire model and the LED chip model in your inquiry.
The supplier can then compare your existing assembly with candidate models such as SUN-SL56, SUN-SL66, SUN-SL78 or SUN-SL107.
If the dimensions do not match, ask about the custom LED glass molding service listed in the catalogue.
Then confirm the required drawings, customization feasibility, cost and lead time in the formal quotation.
These details depend on the design and order, and are not specified as fixed terms in the catalogue.
The beam must also suit the road. Share the pole height, road width, pole spacing and the issue you want to solve, such as a dark road surface or uneven lighting.
The supplier can then discuss a beam angle or the catalogue’s DIALux simulation service.
When requesting a quotation for LED street light glass lens, state the application and preferred model, then include your LED and luminaire details.
Prepare at least the following information:
1.Model or lens size: Give the model, such as SUN-SL66, or provide the diameter, height and mounting-hole details.
2.LED information: Include the LED model, chip size and power so the supplier can check catalogue compatibility.
3.Road and beam requirements: Share the pole height, road width, pole spacing and preferred light direction.
4.Coastal installation conditions: Explain whether the light is exposed to sea air, sea spray or frequent washing, and state your preference for an aluminum holder.
5.Testing and commercial details: Ask what the IP test covers, and request available test documents, sample terms, MOQ, price and lead time. These commercial terms should be quoted for the specific model and quantity; they are not fixed in the catalogue.
You can copy this RFQ template and fill in the details:
We are sourcing LED glass lens for an outdoor street light in a coastal project. The existing luminaire measures [diameter / height / mounting holes]. The LED model and chip size are [details]. The pole height is [value], road width is [value], and pole spacing is [value]. Please recommend a suitable borosilicate glass lens model and beam angle, and confirm whether it is available with an aluminum holder and silicone gasket. Please provide the relevant product drawing, compatible LED range, IP test scope and report details, and quote for samples, MOQ and lead time.
The catalogue also lists DIALux lighting simulation. If you need a simulation, include the road dimensions and pole layout.
Why consider a borosilicate glass lens for a coastal street light?
Sea air, sunlight and temperature changes put outdoor lenses to the test. Borosilicate glass is less prone to yellowing and is more scratch-resistant.
Which street light glass lens model is right for my project?
Share the existing lens dimensions, LED chip size, pole height, road width and pole spacing. Then compare the catalogue models by size, compatible LED power and beam angle.
For example, SUN-SL56 and SUN-SL66 are smaller models, while the SUN-SL107 series offers several beam-angle options. The right model depends on both fit and lighting requirements.You can also send us a photo of the existing lens and a measurement photo with a ruler. Confirm the fit first, then discuss the beam distribution.
What is the SUN-SL107-87 street light lens used for?
The catalogue lists the SUN-SL107-87 at Dia. 107 × H 33 mm, with a 75 × 135° beam angle. It is listed for 50–100 W LEDs and LED chips smaller than 76 × 51 mm.
To check whether it suits your road, confirm the installation space and pole layout. You can include the model in your RFQ and ask us to review the beam angle against your road width, pole height and spacing.
Can an aluminum holder make a street light waterproof?
The aluminum holder alone cannot guarantee waterproofing. It secures the LED lens, while the gasket, contact surface and assembly method all affect the joint.
Let us confirm the holder and gasket configuration for your model. Also confirm whether any IP test covers the lens assembly, module or complete luminaire.
Does the catalogue’s IP67 rating apply to the complete street light?
Do not assume that it does. The catalogue lists IP67 with the matched gasket and accessory offering, but the complete luminaire’s rating depends on the tested assembly and its configuration.
Ask for the test scope, installation conditions and report details for the exact configuration you plan to use.
Can a glass lens be customized for an existing LED street light?
The catalogue lists custom glass molding as an available service. Send the existing lens dimensions, mounting holes, luminaire photos, LED chip size and beam requirements so wer can assess the design.
How do I request a quotation or sample for a street light glass lens?
Email sales@sunshineopto.com with the target model or dimensions, LED model, chip size, luminaire photos, pole height, road width and pole spacing.
Ask for sample terms, price, MOQ, lead time and the relevant test documents. Commercial terms should be confirmed for your specific model and quantity.
Can I request a DIALux simulation before buying?
The catalogue lists DIALux lighting simulation as an available service. Provide the pole height, road width, pole spacing, luminaire dimensions and desired light distribution.
Confirm the required input files and simulation scope with the supplier before deciding on a model or custom design.
Need a quotation or model recommendation?
Email your target model or dimensions, LED lens model, luminaire photos, pole height, road width and pole spacing.